+31 (0) 318 636363 
Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken. 
Project data:
Adhesive has to adhere to coated board. A high performing copolymer adhesive has to be tested otherwise.
The adhesive is applied by extrusion application.
Advised viscosity range : 2500 - 3000 mPas.
Please first test homopolymer based adhesives. If these types of adhesives do not perform properly please execute test using copolymer based adhesives.
LABELLING: Fast setting/drying labelling adhesive PR 1475 is a synthetic adhesive for labelling glass, the ice-water resistance is at least 2 weeks.
This adhesive exhibits excellent flow properties and can be used on most automatic labelling machines.
The Fast setting/drying labelling adhesive PR 1475 has a long run dry time and a high tack
LABELLING: Labelling Adhesive for wet bottles PR0193 is a synthetic adhesive for labelling glass, the ice-water resistence (IWR) is at least 2 weeks. It has been specifically designed for application on beer bottles
Labelling Adhesive for wet bottles PR0193 exhibits excellent flow properties and can be used on most automatic labelling machines. The Labelling Adhesive for wet bottles PR0193 has a long run dry time and a high tack
Technical data:
| Composition | Dispersion adhesive based on acrylates |
| Solid content | 37,0 - 38,0 % |
| pH | 8,0 – 9,0 |
| Colour | white |
| Brookfield viscosity | 65.000 mPa.s (HAT; spindle 6; 20 rpm; 20°C) |
Application in food Packaging : conforms to FDA CFR 21 § 175.105 (adhesives)
Method of application:
A working temperature between 20°C and 30°C usually gives the best result.
Labelling Adhesive for wet bottles PR0193 can be applied by wheel and roller systems.
Because this type of adhesive is sensitive for phase seperation, the adhesive needs to be stirred before use,
or pumped around on the machine for a while.
The solid content of adhesives is an important parameter for the possibilities for your products and production. The solid content influences drying time, moisture effects on your paper and substrates and mostly of less importance: shrinking.
Solid content describes how much water you can expect in your waterbased adhesive.Most typical adhesives have a solid content around 50%. Starch based adhesives mostly have a solid content of 5-20% and some synthetical products up top 80 or 90%. Dextrine based adhesives can be around 70% solid content. Animal-glue (gelatin, protein adhesive) mostly has a solid content of 60-70%. These adhesives have an application temperature of ca. 70 degrees celcius.
At Intercol we are able to design an adhesive to your specific requirements, based on your production process, we can adapt several parameters of our adhesive, such as:
-solid content
-viscosity
-drying time (setting time).
-open time
-compressing time (pressure time)
-refraction
-rheology
-PH
-density
-elasticity
-tack (wet tack)
-water resistancy
-heat resistancy
-shear
-peel
-SAFT
Solid content of adhesives may be relevant to:
-Dispersion adhesives
-Polyvinyl acetate Adhesives
-Polyvinylalcohol Adhesive Solution
-Starch adhesives
-Dextrin adhesives
-Synthetic adhesives
-Urea resin adhesives
-homopolymer adhesives
-copolymer adhesives
-soy based adhesives
-casein based adhesives
Intercol adhesives is a specialist in the area of honeycomb adhesives, in terms of adhesion, water-resistancy and fire retarandcy of your end product, we have developed dozens of customer designed formulations. Our adhesives enable our customers to run most efficiënt, no pollution of small particles, 100% reliability due to camera detected adhesives, no clugging of adhesive outlets/nozzles.
Intercol;s adhesive for gluing of the top seam of flour bags or the side seam of single wall bags. Several grades suitable for nozzle and wheel application. Standard adhesives in this range are based on homopolymer - water based, PVAc - This adhesive provides fast bonding applications for small sacks - standard sacks- big sacks.
Intercol offers adhesives for American folding boxes
Side seam adhesives are tending more and more to non contact jetting applications with a nozzle.
Read more about this in our article: Corrugated board industry newsletter
Intercol is a manufacturer of adhesives that can be based ona polyvinylacetate dispersion. We have standard side seam adhesives for folding machines, Superjet adhesives are developed for gluing of normal paper and (solid) board qualities in the packaging industry. We offer several grades, suitable for roller and nozzle application. adhesive-technology: homopolymer - water based, PVAc - water based adhesives: side seam - corrugated board, folding carton - case & carton sealing glues , side seam - folding cartons
Intercol has an extensive adhesive range for side seem applications, with the perfect balance between
With our diverse and professional equipped laboratry with non contact jetting technology (nozzle gluing equipment) we do test every adhesive on standard conditions. If required, we can take customer's specific machine parameters with our tests, on our Baumer HHS, Robatech and Nordson adhesive application systems. For side and longitudinal seam applications with nozzle. (jetting)
Nordson's Freedom hot melt glue systems, Graco's Invisipac melting-on-demand systems and similar Valco Melton systems offer exceptional benefits.
Our certified product assembly and packaging hot melt adhesives are not blocking and flowing well through the suction hose of tankless hot melt systems. In addition, our standard hot melts provide an exceptionally good adhesion with a lot of fiber adhesion on even the most difficult to bond substrates. Hot melt adhesives from Intercol are always produced with A-grade raw materials. In addition to our standard range of hotmelts, we offer:
• Hotmelt customized development - When your production process needs the maximum efficiency, the right hotmelt can mean a lot here.
• Technical service - Our experienced sales engineers offer support from various laboratories offering on-site support, which maps the technical requirements thoroughly.
• Practice and lab tests - In one of our laboratories, a comparative test is usually done between different circumstances. This shows first of all the performance of the various hotmelt adhesives in laboratory circumstances.
• Flexibility - Our standard assortment of adhesives is very extensive based on various adhesive technologies, such as EVA, polyolefin, polyester, metallocene, polyamide and PLA
• Global support - For our hot melt products, various distributors are available worldwide, with a technical approach to hot melt adhesives.
New products are added daily to our hotmelt assortment, delivering exceptional performance to our customers. Our focus on only glue gives us a head start in this market area.
So if you have a tankless melting-on-demand hot melt system, you can immediately order a glue that is in stock at our warehouse in Ede, The Netherlands.